Entity: Gtx7Core
- File: Gtx7Core.vhd
Diagram
Description
Company : SLAC National Accelerator Laboratory
Description: Wrapper for Xilinx 7-series GTX primitive
This file is part of 'SLAC Firmware Standard Library'. It is subject to the license terms in the LICENSE.txt file found in the top-level directory of this distribution and at: https://confluence.slac.stanford.edu/display/ppareg/LICENSE.html. No part of 'SLAC Firmware Standard Library', including this file, may be copied, modified, propagated, or distributed except according to
the terms contained in the LICENSE.txt file.
Generics
| Generic name | Type | Value | Description |
|---|---|---|---|
| TPD_G | time | 1 ns | |
| SIM_GTRESET_SPEEDUP_G | string | "FALSE" | Sim Generics -- |
| SIM_VERSION_G | string | "4.0" | |
| SIMULATION_G | boolean | false | |
| STABLE_CLOCK_PERIOD_G | real | 4.0E-9 | units of seconds |
| CPLL_REFCLK_SEL_G | bit_vector | "001" | CPLL Settings -- |
| CPLL_FBDIV_G | integer | 4 | |
| CPLL_FBDIV_45_G | integer | 5 | |
| CPLL_REFCLK_DIV_G | integer | 1 | |
| RXOUT_DIV_G | integer | 2 | |
| TXOUT_DIV_G | integer | 2 | |
| RX_CLK25_DIV_G | integer | 5 | Set by wizard |
| TX_CLK25_DIV_G | integer | 5 | Set by wizard |
| PMA_RSV_G | bit_vector | X"00018480" | Use X"00018480" when RXPLL=CPLL |
| RX_OS_CFG_G | bit_vector | "0000010000000" | Set by wizard |
| RXCDR_CFG_G | bit_vector | x"03000023ff40200020" | Set by wizard |
| TX_PLL_G | string | "CPLL" | Configure PLL sources |
| RX_PLL_G | string | "CPLL" | |
| TX_EXT_DATA_WIDTH_G | integer | 16 | Configure Data widths |
| TX_INT_DATA_WIDTH_G | integer | 20 | |
| TX_8B10B_EN_G | boolean | true | |
| RX_EXT_DATA_WIDTH_G | integer | 16 | |
| RX_INT_DATA_WIDTH_G | integer | 20 | |
| RX_8B10B_EN_G | boolean | true | |
| TX_BUF_EN_G | boolean | true | Configure Buffer usage |
| TX_OUTCLK_SRC_G | string | "PLLREFCLK" | or "OUTCLKPMA" when bypassing buffer |
| TX_DLY_BYPASS_G | sl | '1' | 1 for bypass, 0 for delay |
| TX_PHASE_ALIGN_G | string | "AUTO" | Or "MANUAL" or "NONE" |
| TX_BUF_ADDR_MODE_G | string | "FAST" | Or "FULL" |
| RX_BUF_EN_G | boolean | true | |
| RX_OUTCLK_SRC_G | string | "PLLREFCLK" | or "OUTCLKPMA" when bypassing buffer |
| RX_USRCLK_SRC_G | string | "RXOUTCLK" | or "TXOUTCLK" |
| RX_DLY_BYPASS_G | sl | '1' | 1 for bypass, 0 for delay |
| RX_DDIEN_G | sl | '0' | Supposed to be '1' when bypassing rx buffer |
| RX_BUF_ADDR_MODE_G | string | "FAST" | |
| RX_ALIGN_MODE_G | string | "GT" | Or "FIXED_LAT" or "NONE" |
| ALIGN_COMMA_DOUBLE_G | string | "FALSE" | |
| ALIGN_COMMA_ENABLE_G | bit_vector | "1111111111" | |
| ALIGN_COMMA_WORD_G | integer | 2 | |
| ALIGN_MCOMMA_DET_G | string | "FALSE" | |
| ALIGN_MCOMMA_VALUE_G | bit_vector | "1010000011" | |
| ALIGN_MCOMMA_EN_G | sl | '0' | |
| ALIGN_PCOMMA_DET_G | string | "FALSE" | |
| ALIGN_PCOMMA_VALUE_G | bit_vector | "0101111100" | |
| ALIGN_PCOMMA_EN_G | sl | '0' | |
| SHOW_REALIGN_COMMA_G | string | "FALSE" | |
| RXSLIDE_MODE_G | string | "PCS" | Set to PMA for fixed latency operation |
| FIXED_COMMA_EN_G | slv(3 downto 0) | "0011" | Fixed Latency comma alignment (If RX_ALIGN_MODE_G = "FIXED_LAT") |
| FIXED_ALIGN_COMMA_0_G | slv | "----------0101111100" | |
| FIXED_ALIGN_COMMA_1_G | slv | "----------1010000011" | |
| FIXED_ALIGN_COMMA_2_G | slv | "XXXXXXXXXXXXXXXXXXXX" | |
| FIXED_ALIGN_COMMA_3_G | slv | "XXXXXXXXXXXXXXXXXXXX" | |
| RX_DISPERR_SEQ_MATCH_G | string | "TRUE" | Configure RX 8B10B decoding (If RX_8B10B_EN_G = true) |
| DEC_MCOMMA_DETECT_G | string | "TRUE" | |
| DEC_PCOMMA_DETECT_G | string | "TRUE" | |
| DEC_VALID_COMMA_ONLY_G | string | "FALSE" | |
| CBCC_DATA_SOURCE_SEL_G | string | "DECODED" | Configure Clock Correction |
| CLK_COR_SEQ_2_USE_G | string | "FALSE" | |
| CLK_COR_KEEP_IDLE_G | string | "FALSE" | |
| CLK_COR_MAX_LAT_G | integer | 9 | |
| CLK_COR_MIN_LAT_G | integer | 7 | |
| CLK_COR_PRECEDENCE_G | string | "TRUE" | |
| CLK_COR_REPEAT_WAIT_G | integer | 0 | |
| CLK_COR_SEQ_LEN_G | integer | 1 | |
| CLK_COR_SEQ_1_ENABLE_G | bit_vector | "1111" | |
| CLK_COR_SEQ_1_1_G | bit_vector | "0100000000" | UG476 pg 249 |
| CLK_COR_SEQ_1_2_G | bit_vector | "0000000000" | |
| CLK_COR_SEQ_1_3_G | bit_vector | "0000000000" | |
| CLK_COR_SEQ_1_4_G | bit_vector | "0000000000" | |
| CLK_CORRECT_USE_G | string | "FALSE" | |
| CLK_COR_SEQ_2_ENABLE_G | bit_vector | "0000" | |
| CLK_COR_SEQ_2_1_G | bit_vector | "0100000000" | UG476 pg 249 |
| CLK_COR_SEQ_2_2_G | bit_vector | "0000000000" | |
| CLK_COR_SEQ_2_3_G | bit_vector | "0000000000" | |
| CLK_COR_SEQ_2_4_G | bit_vector | "0000000000" | |
| RX_CHAN_BOND_EN_G | boolean | false | Configure Channel Bonding |
| RX_CHAN_BOND_MASTER_G | boolean | false | True: Master, False: Slave |
| CHAN_BOND_KEEP_ALIGN_G | string | "FALSE" | |
| CHAN_BOND_MAX_SKEW_G | integer | 1 | |
| CHAN_BOND_SEQ_LEN_G | integer | 1 | |
| CHAN_BOND_SEQ_1_1_G | bit_vector | "0000000000" | |
| CHAN_BOND_SEQ_1_2_G | bit_vector | "0000000000" | |
| CHAN_BOND_SEQ_1_3_G | bit_vector | "0000000000" | |
| CHAN_BOND_SEQ_1_4_G | bit_vector | "0000000000" | |
| CHAN_BOND_SEQ_1_ENABLE_G | bit_vector | "1111" | |
| CHAN_BOND_SEQ_2_1_G | bit_vector | "0000000000" | |
| CHAN_BOND_SEQ_2_2_G | bit_vector | "0000000000" | |
| CHAN_BOND_SEQ_2_3_G | bit_vector | "0000000000" | |
| CHAN_BOND_SEQ_2_4_G | bit_vector | "0000000000" | |
| CHAN_BOND_SEQ_2_ENABLE_G | bit_vector | "0000" | |
| CHAN_BOND_SEQ_2_USE_G | string | "FALSE" | |
| FTS_DESKEW_SEQ_ENABLE_G | bit_vector | "1111" | |
| FTS_LANE_DESKEW_CFG_G | bit_vector | "1111" | |
| FTS_LANE_DESKEW_EN_G | string | "FALSE" | |
| RX_EQUALIZER_G | string | "DFE" | Or "LPM" |
| RX_DFE_KL_CFG2_G | bit_vector | x"3008E56A" | Set by wizard |
| RX_CM_TRIM_G | bit_vector | "010" | |
| RX_DFE_LPM_CFG_G | bit_vector | x"0954" | |
| RXDFELFOVRDEN_G | sl | '1' | |
| RXDFEXYDEN_G | sl | '1' | This should always be 1 |
Ports
| Port name | Direction | Type | Description |
|---|---|---|---|
| stableClkIn | in | sl | Freerunning clock needed to drive reset logic |
| cPllRefClkIn | in | sl | Drives CPLL if used |
| cPllLockOut | out | sl | |
| qPllRefClkIn | in | sl | Signals from QPLL if used |
| qPllClkIn | in | sl | |
| qPllLockIn | in | sl | |
| qPllRefClkLostIn | in | sl | |
| qPllResetOut | out | sl | |
| gtRxRefClkBufg | in | sl | In fixed latency mode, need BUF'd version of gt rx |
| gtTxP | out | sl | reference clock to check if recovered clock is stableSerial IO |
| gtTxN | out | sl | |
| gtRxP | in | sl | |
| gtRxN | in | sl | |
| rxOutClkOut | out | sl | Rx Clock related signals |
| rxUsrClkIn | in | sl | |
| rxUsrClk2In | in | sl | |
| rxUserRdyOut | out | sl | |
| rxMmcmResetOut | out | sl | |
| rxMmcmLockedIn | in | sl | |
| rxUserResetIn | in | sl | Rx User Reset Signals |
| rxResetDoneOut | out | sl | |
| rxDataValidIn | in | sl | Manual Comma Align signals |
| rxSlideIn | in | sl | |
| rxDataOut | out | slv(RX_EXT_DATA_WIDTH_G-1 downto 0) | Rx Data and decode signals |
| rxCharIsKOut | out | slv((RX_EXT_DATA_WIDTH_G/8)-1 downto 0) | If WIDTH not mult of 8 then |
| rxDecErrOut | out | slv((RX_EXT_DATA_WIDTH_G/8)-1 downto 0) | not using 8b10b and these dont matter |
| rxDispErrOut | out | slv((RX_EXT_DATA_WIDTH_G/8)-1 downto 0) | |
| rxPolarityIn | in | sl | |
| rxBufStatusOut | out | slv(2 downto 0) | |
| rxChBondLevelIn | in | slv(2 downto 0) | Rx Channel Bonding |
| rxChBondIn | in | slv(4 downto 0) | |
| rxChBondOut | out | slv(4 downto 0) | |
| txOutClkOut | out | sl | Tx Clock Related Signals |
| txUsrClkIn | in | sl | |
| txUsrClk2In | in | sl | |
| txUserRdyOut | out | sl | txOutClk is valid |
| txMmcmResetOut | out | sl | |
| txMmcmLockedIn | in | sl | |
| txUserResetIn | in | sl | Tx User Reset signals |
| txResetDoneOut | out | sl | |
| txDataIn | in | slv(TX_EXT_DATA_WIDTH_G-1 downto 0) | Tx Data |
| txCharIsKIn | in | slv((TX_EXT_DATA_WIDTH_G/8)-1 downto 0) | |
| txBufStatusOut | out | slv(1 downto 0) | |
| txPolarityIn | in | sl | |
| txPowerDown | in | slv(1 downto 0) | Debug Interface |
| rxPowerDown | in | slv(1 downto 0) | |
| loopbackIn | in | slv(2 downto 0) | |
| txPreCursor | in | slv(4 downto 0) | |
| txPostCursor | in | slv(4 downto 0) | |
| txDiffCtrl | in | slv(3 downto 0) | |
| drpClk | in | sl | DRP Interface (drpClk Domain) |
| drpRdy | out | sl | |
| drpEn | in | sl | |
| drpWe | in | sl | |
| drpAddr | in | slv(8 downto 0) | |
| drpDi | in | slv(15 downto 0) | |
| drpDo | out | slv(15 downto 0) |
Signals
| Name | Type | Description |
|---|---|---|
| cPllLock | sl | ------------------------------------------------------------------------------------------------ Signals ------------------------------------------------------------------------------------------------ CPll Reset |
| cPllReset | sl | |
| cPllRefClkLost | sl | |
| gtGRefClk | sl | Gtx CPLL Input Clocks |
| gtNorthRefClk0 | sl | |
| gtNorthRefClk1 | sl | |
| gtRefClk0 | sl | |
| gtRefClk1 | sl | |
| gtSouthRefClk0 | sl | |
| gtSouthRefClk1 | sl | |
| rxOutClk | sl | -------------------------- Rx Signals |
| rxOutClkBufg | sl | |
| rxPllLock | sl | |
| rxPllReset | sl | |
| rxPllRefClkLost | sl | |
| gtRxReset | sl | GT GTRXRESET |
| rxResetDone | sl | GT RXRESETDONE |
| rxUserRdyInt | sl | GT RXUSERRDY |
| rxUserResetInt | sl | |
| rxFsmResetDone | sl | |
| rxRstTxUserRdy | sl | |
| rxRecClkStable | sl | |
| rxRecClkMonitorRestart | sl | |
| rxCdrLockCnt | integer range 0 to WAIT_TIME_CDRLOCK_C | |
| rxRunPhAlignment | sl | |
| rxPhaseAlignmentDone | sl | |
| rxAlignReset | sl | |
| rxDlySReset | sl | GT RXDLYSRESET |
| rxDlySResetDone | sl | GT RXDLYSRESETDONE |
| rxPhAlignDone | sl | GT RXPHALIGNDONE |
| rxSlide | sl | GT RXSLIDE |
| rxCdrLock | sl | GT RXCDRLOCK |
| rxDfeAgcHold | sl | |
| rxDfeLfHold | sl | |
| rxLpmLfHold | sl | |
| rxLpmHfHold | sl | |
| rxDataInt | slv(RX_EXT_DATA_WIDTH_G-1 downto 0) | Rx Data |
| rxDataFull | slv(63 downto 0) | GT RXDATA |
| rxCharIsKFull | slv(7 downto 0) | GT RXCHARISK |
| rxDispErrFull | slv(7 downto 0) | GT RXDISPERR |
| rxDecErrFull | slv(7 downto 0) | |
| txPllLock | sl | -------------------------- Tx Signals |
| txPllReset | sl | |
| txPllRefClkLost | sl | |
| gtTxReset | sl | GT GTTXRESET |
| txResetDone | sl | GT TXRESETDONE |
| txUserRdyInt | sl | GT TXUSERRDY |
| txFsmResetDone | sl | |
| txResetPhAlignment | sl | |
| txRunPhAlignment | sl | |
| txPhaseAlignmentDone | sl | |
| txPhAlignEn | sl | GT TXPHALIGNEN |
| txDlySReset | sl | GT TXDLYSRESET |
| txDlySResetDone | sl | GT TXDLYSRESETDONE |
| txPhInit | sl | GT TXPHINIT |
| txPhInitDone | sl | GT TXPHINITDONE |
| txPhAlign | sl | GT TXPHALIGN |
| txPhAlignDone | sl | GT TXPHALIGNDONE |
| txDlyEn | sl | GT TXDLYEN |
| txDataFull | slv(63 downto 0) | Tx Data Signals |
| txCharIsKFull | slv(7 downto 0) | |
| txCharDispMode | slv(7 downto 0) | |
| txCharDispVal | slv(7 downto 0) |
Constants
| Name | Type | Value | Description |
|---|---|---|---|
| RX_SYSCLK_SEL_C | slv | ite(RX_PLL_G = "CPLL", "00", "11") |
------------------------------------------------------------------------------------------------ Constants ------------------------------------------------------------------------------------------------ |
| TX_SYSCLK_SEL_C | slv | ite(TX_PLL_G = "CPLL", "00", "11") |
|
| RX_XCLK_SEL_C | string | ite(RX_BUF_EN_G, "RXREC", "RXUSR") |
|
| TX_XCLK_SEL_C | string | ite(TX_BUF_EN_G, "TXOUT", "TXUSR") |
|
| RX_OUTCLK_SEL_C | bit_vector | getOutClkSelVal(RX_OUTCLK_SRC_G) | |
| TX_OUTCLK_SEL_C | bit_vector | getOutClkSelVal(TX_OUTCLK_SRC_G) | |
| RX_DATA_WIDTH_C | integer | getDataWidth(RX_8B10B_EN_G, RX_EXT_DATA_WIDTH_G) |
|
| TX_DATA_WIDTH_C | integer | getDataWidth(TX_8B10B_EN_G, TX_EXT_DATA_WIDTH_G) |
|
| WAIT_TIME_CDRLOCK_C | integer | ite(SIM_GTRESET_SPEEDUP_G = "TRUE", 16, 65520) |
|
| RX_INT_DATAWIDTH_C | integer | (RX_INT_DATA_WIDTH_G/32) | |
| TX_INT_DATAWIDTH_C | integer | (TX_INT_DATA_WIDTH_G/32) | |
| RXLPMEN_C | sl | ite(RX_EQUALIZER_G = "LPM", '1', '0') |
Functions
- getOutClkSelVal (OUT_CLK_SRC : string) return bit_vector
- getDataWidth (USE_8B10B : boolean;
EXT_DATA_WIDTH : integer) return integer
Processes
- RX_DATA_8B10B_GLUE: ( rxCharIsKFull, rxDataFull, rxDecErrFull,
rxDispErrFull )
- unnamed: ( stableClkIn )
- TX_DATA_8B10B_GLUE: ( txCharIsKIn, txDataIn )
Description
------------------------------------------------------------------------------------------------ Tx Logic ------------------------------------------------------------------------------------------------
Instantiations
- Gtx7RxRst_Inst: surf.Gtx7RxRst
Description
Rx Reset Module
- Reset RX PLL,
- Wait PLL Lock
- Wait recclk_stable
- Reset MMCM
- Wait MMCM Lock
- Assert gtRxUserRdy (gtRxUsrClk now usable)
- Wait gtRxResetDone
- Do phase alignment if necessary
- Wait DATA_VALID (aligned) - 100 us
10. Wait 1 us, Set rxFsmResetDone.
- RstSync_RxResetDone: surf.RstSync
Description
Synchronize rxFsmResetDone to rxUsrClk to use as reset for external logic.
- BUFG_RX_OUT_CLK: BUFG
Description
Output
Recovered clock monitor
- Gtx7TxRst_Inst: surf.Gtx7TxRst
Description
Tx Reset Module
- RstSync_Tx: surf.RstSync
Description
Might be interesting to look at
Synchronize rxFsmResetDone to rxUsrClk to use as reset for external logic.
- gtxe2_i: GTXE2_CHANNEL