Entity: up_tpl_common

Diagram

COMMON_ID NUM_PROFILES [NUM_PROFILES*8-1: 0] jesd_m [NUM_PROFILES*8-1: 0] jesd_l [NUM_PROFILES*8-1: 0] jesd_s [NUM_PROFILES*8-1: 0] jesd_f [NUM_PROFILES*8-1: 0] jesd_n [NUM_PROFILES*8-1: 0] jesd_np up_rstn up_clk up_wreq [10:0] up_waddr [31:0] up_wdata up_rreq [10:0] up_raddr reg [$clog2(NUM_PROFILES):0] up_profile_sel up_wack [31:0] up_rdata up_rack

Description

Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.

In this HDL repository, there are many different and unique modules, consisting of various HDL (Verilog or VHDL) components. The individual modules are developed independently, and may be accompanied by separate and unique license terms.

The user should read each of these license terms, and understand the freedoms and responsibilities that he or she has by using this source/core.

This core is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Redistribution and use of source or resulting binaries, with or without modification of this file, are permitted under one of the following two license terms:

  1. The GNU General Public License version 2 as published by the Free Software Foundation, which can be found in the top level directory of this repository (LICENSE_GPL2), and also online at: https://www.gnu.org/licenses/old-licenses/gpl-2.0.html

OR

  1. An ADI specific BSD license, which can be found in the top level directory of this repository (LICENSE_ADIBSD), and also on-line at: https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD This will allow to generate bit files and not release the source code, as long as it attaches to an ADI device.

Generics

Generic name Type Value Description
COMMON_ID 2'h0 Offset of regmap
NUM_PROFILES 1 Number of JESD profiles

Ports

Port name Direction Type Description
jesd_m input [NUM_PROFILES*8-1: 0]
jesd_l input [NUM_PROFILES*8-1: 0]
jesd_s input [NUM_PROFILES*8-1: 0]
jesd_f input [NUM_PROFILES*8-1: 0]
jesd_n input [NUM_PROFILES*8-1: 0]
jesd_np input [NUM_PROFILES*8-1: 0]
up_profile_sel output reg [$clog2(NUM_PROFILES):0]
up_rstn input bus interface
up_clk input
up_wreq input
up_waddr input [10:0]
up_wdata input [31:0]
up_wack output
up_rreq input
up_raddr input [10:0]
up_rdata output [31:0]
up_rack output

Signals

Name Type Description
up_rack_int reg internal registers
up_wack_int reg
up_rdata_int reg [31:0]
up_wreq_s wire internal signals
up_rreq_s wire
up_rdata_jesd_params reg [31:0]
i integer

Processes

Type: always

Type: always

Type: always