Entity: pinmux_wkup

• File: pinmux_wkup.sv

Diagram

Description

Generics

Generic name	Type	Value	Description
Cycles	int	4

Ports

Port name	Direction	Type	Description
clk_i	input
rst_ni	input
wkup_en_i	input
filter_en_i	input
wkup_mode_i	input	wkup_mode_e
wkup_cnt_th_i	input	[WkupCntWidth-1:0]
pin_value_i	input
aon_wkup_pulse_o	output		Wakeup request pulse signal

Signals

Name	Type	Description
filter_out	logic	////////////////////////// Optional Signal Filter // ////////////////////////// This uses a lower value for filtering than GPIO since the always-on clock is slower. This can be disabled, in which case the signal is just combinationally bypassed.
filter_out_d	logic	////////////////////////// Optional Signal Filter // ////////////////////////// This uses a lower value for filtering than GPIO since the always-on clock is slower. This can be disabled, in which case the signal is just combinationally bypassed.
filter_out_q	logic	////////////////////////// Optional Signal Filter // ////////////////////////// This uses a lower value for filtering than GPIO since the always-on clock is slower. This can be disabled, in which case the signal is just combinationally bypassed.
rising	logic	//////////////////// Pattern Matching // ////////////////////
falling	logic	//////////////////// Pattern Matching // ////////////////////
cnt_en	logic
cnt_eq_th	logic
cnt_d	logic [WkupCntWidth-1:0]
cnt_q	logic [WkupCntWidth-1:0]

Processes

• p_mode: ( )

• p_aon_pattern: ( @(posedge clk_i or negedge rst_ni) )

Instantiations

• u_prim_filter: prim_filter

• u_prim_flop_2sync_filter: prim_flop_2sync